How dose the scanner work contained by details?
Answer:
Try this trellis page
http://en.wikipedia.org/wiki/image_scann...
It works only if in that is electricity
The Scanning Process
Here are the steps that a scanner goes through when it scan a document:
The document is placed on the glass plate and the cover is closed. The inside of the cover within most scanners is flat white, although a few are black. The cover provides a uniform background that the scanner software can use as a hint point for determining the size of the document being scan. Most flatbed scanners allow the cover to be removed for scanning a bulky protest, such as a page in a gelatinous book.
In the image above, you can see the fluorescent storm lantern on top of the scan commander.
A lamp is used to illuminate the document. The hurricane lantern in newer scanners is any a cold cathode fluorescent lamp (CCFL) or a xenon oil lamp, while older scanners may hold a standard fluorescent lamp.
The entire instrument (mirrors, lens, filter and CCD array) make up the scan skipper. The scan head is moved slowly across the document by a belt explicitly attached to a stepper motor. The scan head is attached to a stabilizer tablet to ensure that there is no wobble or deviation contained by the pass. Pass routine that the scan head have completed a single complete scan of the document.
The stabilizer bar is really durable and tightly secured to the body of the scanner.
The image of the document is reflect by an angled mirror to another mirror. In some scanners, there are solely two mirrors while others use a three mirror approach. Each mirror is slightly curved to focus the image it reflect onto a smaller surface.
The last mirror reflect the image onto a lens. The lens focuses the doll through a filter on the CCD array.
Look carefully at the portrait above and you can see all three of the mirrors plus the lens assembly contained by this scan head.
The filter and lens arrangement alter based on the scanner. Some scanners use a three surpass scanning method. Each go past uses a different color filter (red, green or blue) between the lens and CCD array. After the three passes are completed, the scanner software assembles the three filter images into a single full-color depiction.
Click on the green Scan button to see the scanning process.
Most scanners today use the single miss method. The lens splits the image into three smaller version of the original. Each smaller text passes through a color filter (either red, green or blue) onto a discrete fragment of the CCD array. The scanner combines the data from the three parts of the CCD array into a single full-color sign.
Another imaging array technology that has become popular contained by inexpensive flatbed scanners is contact image sensor (CIS). CIS replaces the CCD array, mirrors, filter, lamp and lens near rows of red, green and blue light emit diodes (LEDs). The image sensor workings, consisting of 300 to 600 sensors spanning the width of the scan nouns, is placed very close to the cup plate that the document rests upon. When the image is scan, the LEDs combine to provide white light. The illuminate image is afterwards captured by the row of sensors. CIS scanners are cheaper, lighter and thinner, but do not provide alike level of power and resolution found in most CCD scanners.
Related Questions: