Virtual LPT Port contained by DOS?
Please give support to and advice.
Answer:
If you enjoy USB ports, they would appear as mapped to USBLPT1 or something similar to that contained by DOS.
Net use command should work, but you need to be logged surrounded by as administrator.
I found this:
Printing from DOS applications in Windows XP to a non-Parallel printer
In command to print from DOS in an offline environment contained by Windows XP, you will need to first install the Microsoft Loopback Adapter. Note if you are on a LAN, skip steps 1 and 2, and use your computer's IP address contained by the command in Step 4.
Install the Microsoft Loopback Adapter
In Control Panel, double click on Add Hardware.
Click Next
When the scan finishes, select "Yes, I hold already connected the hardware"
Click Next
Scroll to the bottom of the list and select "Add a foreign hardware device"
Click Next
Select "Install the hardware that I manually select from a list (Advanced)"
Click Next
Select "Network Adapters"
Click Next
Select "Microsoft" underneath the Manufacturer list.
Select "Microsoft Loopback Adapter" contained by the Network Adapter list.
Click Next
Click Next
Click Finish
Configure the Adapter
The loopback adapter is a virtual lattice adapter and can be configured the same as a regular web card.
Set the adapter to have a static IP address such as 192.168.1.1/ 255.255.255.0
Share the printer. We recommend you use a share heading that you will remember. I used ìPrinter^i in the unsullied machines that are already deployed.
Capture the printer port.
In the start menu, select Run
In the run dialogue box, type the following:
NET USE LPT1: \\[IP Address from step 2b]\Printer /PERSISTENT:YESClick OK
You may now print to the LPT1: port as if it be a normal printer, and it should work near most DOS applications.
Try using a switch or router and turn the printer into a network printer, you will obligation to get an external print server depending on the type of printer you own
Related Questions: