Canon IP5000 prints hefty pallid faded pictures. Changed toner, alignment, cleaning, drivers, zilch works?
Answer:
Usually when something like this occur in a printer it have to do with how the printer interprets information. Check and be paid sure there is nought wrong with the cable. If you are using a USB cable later you shouldn't have any problems. Unplug the USB cable and plug it wager on in and get sure that it looks like the USB cable is sitting surrounded by there properly. If you're using a printer cable, engender sure the printer cable contacts look fine.
If neither of those things are the problem, the printer is probably no good. Usually this shows up when they start messing up facts on the printer board. Sometimes something shorts out or it just is infirm. If the printer isn't old, it could be anything. I would put it on the printer mortal bad though. I've see it happen a few times and I can honestly vote that typically there is no prearranged cause for this except the printer or a bad cable. Especially if it worked back. Also think if you have any recent updates for your printer or updated your printer drivers.
Try deep cleaning, if that doesn't work, try printing something minus the yellow cartrige, or possibly the saturation level is set to maximum wan, or maybye you have the wrong drivers, because some printers use more ink than others.
Hope this help!
I think you should adjustment your catridges or you should re-install your printer's software driver.......... that will work..........
Related Questions: