Have a Dell 4in1printer. How do I connect to dsl so I can us fax?
Answer:
You hold to remember the basic certainty that fax machines use regular phone lines to transmit and receive faxes. Which means that if you hold a fax machine AND you own DSL, the fax machine requirements to have access to the phone queue itself.
So here is what you do, first you need to bring a phone cable (the regular smaller size RJ11 like the one that go into your phone, NOT the bigger DSL size called RJ45 or ethernet network cables). If you have DSL, later surely you are using filters on your phone wall jacks. The filter say phone and DSL on them and they seperate the signal. The phone connects to the phone and the DSL connects to the modem. For the fax appliance, you need to use the phone side of the filter.
I don't know how several wall jacks you have contained by your home but I am assuming that you have one like peas in a pod room and it is available (otherwise it gets a bit more complicated). Take a filter. Put it contained by the empty wall jack. The DSL side of the filter connects to the DSL modem. The phone side of the filter connects to the fax device.
I am also assuming that you want to use the printer as a fax machine itself. You don't want to use the computer itself for faxes. If you want to do that, later you simply plug the cable into your computer instead of the 4in1 printer. The tower itself should have the nouns available because they are not exactly extinct yet. If you don't hold that, then you are going to own to get a modem.
I know it sounds pretty horrible but its really not that fruitless.
Feel free to contact me if you need anymore aid.
Hi, you need to plug contained by the analog plug into a standard phone outlet, (either with or minus the dsl filter, use the filter one if the dell has a phone headset connected). That way, you can transport and receive faxes even if the computer is off. Technically, you are not using the DSL nouns to fax, you really use the standard RJ-11 jack. As far as the software goes, to be exact for sending faxes inside a windows or Mac program. You would entail to connect a phone line to the modem i.e. built into your motherboard or via plug in card.
CIAO FOR NOW! ---abbey
Fax is dial up. You dont fax over the internet from an adjectives in one printer.
First you enjoy to have a phone stripe connection. You run a vein USB from computer to proper port of printer and a line from phone strip to proper port on printer.
Related Questions: