Help for installing printer!!!!?
now!!!!dont ask me to contact customer prudence i've already done that and the are not replying so plz help!!!!!!!!!!!!!!!!!!
Answer:
It is a bit tricky out near, i used to have alike problem.but what i experienced is as follows.
please follow these steps.
1_ uninstall the printer and dont connect it to your PC.
2_ insert the installation CD into the computer while the printer is not connected.
3_ verbs with the installation.
4_ at some point the setup will ask you to connect the printer.
5_ than connect the printer and it will start installing the drivers.
6_ while the setup is finished restart the computer.
7_ start on the notepad and write something.
8_ go to print select this printer f380.
9_ and tender it a print . i am sure it will work.
10_ come back to RunQA and select my answer as a best one.
Note: the tricky point here is that you connect the printer in the past installing it. so please install it and connected when the setup asks for it.
you can go to http://hpdownload.com and type within your pritner and you can down load it from nearby
go to http://www.linuxprinting.org/show_printe...
and select:
"For advanced functionality such as printer status, keeping features, scanning and photo card unload use the HPLIP driver (which includes HPIJS)."
the HPLIP driver
if this doesnt work, flush google for:
hp f380 drivers and search until you've found one
unscrew the device manager,[right click my computer, properties, hardware consequently device manager] look under printers, click on your printer device, delete it. shut down the computer, remove the printer. turn the computer on, reconnect the printer afterwards install the drivers again.
1.Turn off the printer and remove the nouns cable.
2.Try to uninstall all printer drivers and programs from your computer.
3.Reboot
4. Insert your disc driver installer make sure you own the correct version of your driver (WinXP for WinXP driver, Win95 for WIn95 drivers, etc)
5. Install the driver and produce sure you read and understand every step and you should follow the instructions cautiously.
yes, for usb printer's, never do plug n play. install it
you have to uninstall the printer and install it near install cd
Related Questions: