My epson c44 plus is not allowing me to metamorphosis the ink videotape the green and red street light are both flashing ???
Answer:
It's a rather nondescript service error that usually indicates that your rubbish ink pads are sopping, that your waste ink well are full and in inevitability of replacement or cleaning.
It's done with a page counter built into the driver software and it can be reset.
Simply unplugging and repowering your printer might fix this for you.
If not, you might involve to remove and clean or replace your gamble away ink pads. They're located contained by the bottom of your printer. Basically, you rinse them out, let them dry afterwards reinsert them.
With that done, it's time to reset the counter.
If you're not comfortable with doing this yourself, you'll involve to take it to an authorized Epson repair facility and own them do it. Truthfully, it should run you about $80.00, money that would be better spent on a investigational printer.
If you want to, you can use the software tool below to reset the counter and see if that fixes your problem. Be aware that if your waste ink pad are full, your printer might leak gamble away ink onto your desk.
Good Luck.
Try unplugging the printer for a few minutes, and see if it reset's itself
im an espon certified specialist, this is the waste ink wipe counter warning you that your squander ink pads are full and inevitability to be replaced, im not sure if epson even supports the c44 anymore so even a business parnter might not be able to direct the replacement pads. but the software can be reset regaurdless. if you can find the adjustment program on fixyourownprinter.com you can reset the counter surrounded by the maintenance counter piece.
Related Questions: