My printer will not print?
Answer:
If the printer is going thought the motions of printing but is spitting out a blank page then you may own a dry cartridge, this is cause by not using the printer for more than a month. In this case you will necessitate to run a number of print boss cleanings to hopefully free the blockage or replace the cartridge.
If you hold a blinking ink light or one of your cartridges is untaken then you will call for to replace that cartridge until that time the printer will print, especially if you have a Canon, Epson or Brother printer.
If your printer is basically sitting there indolently then it may be a communication error, check your print mediator (the little printer on the bottom right of the task bar) and see if in attendance are any job contained by it. Cancel them all. Turn of the printer and restart the computer. Once the computer is restarted turn the printer posterior on. It may start printing at this point if it hasn't fully cleaned the jobs from the print regulator.
If all else fail unhook the printer from he computer. Install the driver. Restart the computer, install the printer and only connect the printer to the computer when the installation guide say it is OK.
Hi Pat
If all have felled you can uninstall the printer and consequently reinstall it. That happened to me and when I reinstalled it the printer it worked fine. Make sure your Ink is full and your printer is not jammed up! Hope this help you Pat! Take care!
Bruce
My printer take one black and three color cartridges. If one cartridge is free, the printer will not print.
Ensure all cartridges contain ink.
Go into repairs and clean the print skipper several times.
Try to print.
If it doesn't work, It just may be that the print go before is shot.
Related Questions: