My computer have a power but have no display, what should i do?
Answer:
There may be something wrong near your monitor or your video card. Swap out one or the other and try again.
You know what? Check the cables first. Make sure everything is plugged surrounded by nice and secure.
resourcefully, I guess you won't be able to see any answers!!
buy a strange one ;o)
Make sure that your monitor is plugged into your PC and also into the correct VGA port (if there are more than 1). Do you hear any beep? If there is basically one short beep, at hand is probably a problem with your monitor because the one short toot means that it POSTed and everything tested apposite in the system. If you hear other beep, that indicates a problem...post what you hear.
have you made sure adjectives of you molexs and wires are hooked up correctly, and check by the motherboard on the back of your overnight case to make sure everything is connected
MONITOR PROBLEMS:
A pallid,or orange, monitor indicator reading light indicates no signal is
getting to the monitor from the video card. Could be the card is
not sending a signal, or problem with the cable or connectors.
Card may not sit down properly.
Mostly on Desktop computers----
DUST collects inside computers, and can cause hardware bring down,
overheating, faulty fan, faulty drives ----Is yours verbs??
http://www.makeitsimple.com/projects/cas...
Some pictures
BTW, a few days ago, a person looked inside his computer, and
cleaned it out using a brush. He afterwards lost his Sound.
That way is not advise.
Look for leaking or bulging capacitors on the motherboard.
http://www.pcstats.com/articleview.cfm?a...
Some pictures of them
if in attendance is a beep nouns, then your RAM have come out of the chipset. if there is no nouns then check the external electrics especially between the CPU and the monitor. if wiring is checked and still no response next test the SMPS nouns and data cable nouns to the hard drive and chipset.
Related Questions: