Monitor power collect problems - please relieve !!?
screen is blank and laptop sounds like it is booting up, but can't take the monitor to come out of power save.
does anyone please know how to fix this?? or at lowest to access the bias to check the settings... its not allowing me to do any of this.
Answers:
Your video driver may have become corrupt or you could enjoy inadvertently turned off the primary video. Check your wires are fully plugged within also.
Check the back of your box and see if you hold two places to put your video in. One is an on-board video and the other is installed video card. If it is within the installed video card open the box after you enjoy turned it off and unplugged it and remove the card afterwards plugged the monitor into your on board video port. Then turn it backbone off and reinstall the video card.
If you individual have one Video port you may hold to use the voice narrator within Windows. Activate this by holding down the Windows button between CTRL and ALT and hitting the U button. Move the mouse around and try to work through reactivating your primary video.
Wait Untill You hear The Sound Of It Loging On. IE: Wait about 10mins After Starting Up
Then Shake Your Mouse And Press Your Keyboard.
I Don't Have ANy Other Ideas.
Sorry!
Turn your computer completely bad.
Unplug your computer, as well as your monitor.
Wait a few second...
and plug them booth back into the outlet.
This may relief...
Good luck--
Ms. MNK
To access the BIOS, on some machines you need to hold down the DEL push button while it boots, on others it's F2. Alternatively, try starting the PC with the monitor bad, then turn the monitor on after the PC have apparently booted.
unplug the power supply to the PC and wait 10-20 Min's the hook it backbone up and try again.
More Questions and Answers ...
Related Questions: