The monitor shows no sign. All the tips i find say aloud adjust the graphics card. How do i do that?
Answers:
Hiya Stan P,
I am not 100% sure what you denote by "the monitor shows no sign". I think you niggardly that the monitor is not displaying anything and the computer powers up and seems to be working but beside no picture. Then when you hit the power switch on the front of the computer, it stays on but still no display on the monitor.
If I have that correct after here is what is going on.
The graphics card is not putting out an image, nearby graphics card is putting out an image specifically not making it to the monitor or the monitor is malfunctioning.
Here is how to fix these problems:
1) Remove the cable that attaches the monitor to your computer and check the plug for bent or broken pins. Straighten any bent pins or replace the cable if there are any broken pins because this will prevent the signals from reaching the monitor.
2) Test the monitor by plugging it into a different desktop or laptop computer. If you obtain a picture, the monitor is OK but if you don't get a picture consequently the monitor may be damaged.
3) Graphics Card: Often this considerate of problem can be solved by reseating the graphics card. Make sure the power and the monitor are both unplugged, then sympathetic the computer case. Locate the graphics card and remove the retaining screw. Remove the card and after reinsert in making sure the bottom end of the card is exactly parallel to the plastic edge of the slot on the motherboard. Power up and interview it out.
*If the card is built onto the motherboard then you cannot do this.
POWER SWITCH:
IF you press and hold the power switch on the front of the computer for up to 7 second, it should power the computer off. If it does not next you may have a more serious problem surrounded by the computer.
GOOD LUCK!!
The answers post by the user, for information only, QAPOP.com does not guarantee the right.
More Questions and Answers ...
Related Questions: