I enjoy dim lines going across my monitor how can i get hold of rid of that?
Answer:
If your hot monitor has exactly matching lines the old monitor have then the probability are you have a unpromising video card. If your video is built into your motherboard (Many non home made computers have this) after you have a authentic problem unless your motherboard has an AGP or PCIE slot within which case you can buy a video card to put within one of those slots. I know this might be Greek to you if you are not familiar beside computers but I know no easier way to relate you what I think your problem is. Please enjoy a pro look at it if you are not familiar beside computers.
Hi there.
Did you enunciate the only problem beside your old one be the same two lines across your monitor? How big is your monitor blind size? If it's less than 15", there's simply one wire, but since you're motto there's a few (two to be exact), your screen is above 15". You also didn't mention if the "lines" moved at adjectives up or down. If it did, than it's prob the video card issue, but if it's stationary (see below for more info), it's the wires.
Also, since you bought a new monitor and still achieve the same article, than that rules out the other answer's answer of a bad video card, (if the lines AREN'T moving) as it's not the grounds why.
I'm sorry to inform you that that it (black "lines" are actually shrunken wires) is part of the monitor makeup and is ordinary to be there.
What you're seeing are call stablization wires. Here's why.
The CRT has a specially constructed aperture grill that improve its convergence and produces a sharp and clear image. The aperture grill is a grid of vertical wires located only just behind the CRT blind. These CRTs require a horizontal stabilizing wire or wires to give a hand support the aperture grill. The stabilizing wires, which are thinner than a human hair, moisturize the vibration of the aperture grill wires. If the aperture grill wires be allowed to vibrate consequently the display quality would suffer, respectively time somebody tapped the display or bumped the table where on earth the display is located.
Typically, displays with a viewing nouns of 15 inches or less own a single horizontal grid wire approximately one third from the bottom of the display photo. Displays larger than 15 inches typically have two wires, respectively about one-quarter to one-third of the means of access from the top and bottom of the display image. Televisions may hold up to three stabilizing wires, but because of the constantly changing metaphors are rarely notice.
These "black-appearing" bands of lines are most detectable when there's a white or very standard lamp colored backgroud image displayed on the monitor. You can't take rid of it, as it's needed.
Hope this helps.
nooooo
dude you misspent your money
its your video card
open your tower and be paid sure the dust is blown off of the video card connectors
consequently if it still does it your video card is bad
buy a unknown monitor.
the new monitor have that problem or old monitor have the problem. your new monitor have problem pls return to company and have foreign one.
Related Questions: