How do I acquire my moniter to work near my modern computer?
Answers:
If there's no operating system installed, later there's nothing to transport your PCI video card a signal to send to your monitor. The individual thing you can do near that PC at the moment is either install an OS, or run BIOS. That video card is going to entail an operating system and some drivers loaded before it will enjoy a signal - unless your BIOS can set video output to a PCI slot..
- Is your PC posting when you turn it on -- do you here the post beep so you know the system's working at smallest?
- If so, and you don't see a signal -- where are you connecting your monitor? To the NVidia PCI card output? DVI or VGA? Is near another, onboard VGA/D-Sub port, straight off the motherboard? Pretty predictable that the BIOS is set to output the signal to the motherboard's VGA output, and not any PCI slot..so, attach your monitor to that port, consequently the PC/start BIOS.see if you get a post peak that way.
If you do, a moment ago leave it connected in attendance until you get your operating system and drivers installed. Then you can connect it to your PCI card. (Also, check your BIOS documentation to see you can set graphics output to PCI a bit than VGA; then BIOS will display out your PCI card nouns. But you need to know how to see the BIOS screen to do that!)
Give it a whack!
Depending on what type of monitor most of them are plug and play. what you are going to enjoy to do is to install or have someone install a driver for that monitor and it should work. Here are a couple of pattern sites for drivers.
http://www.download.com/2001-2014-0.html...
http://www.driversplanet.com/
More Questions and Answers ...
Related Questions: