Xbox to computer monitor?
Answers:
Hiya Pub,
Your probably correct in assuming that you can do this next to your existing setup. Lacking any hardware detail except the composite inputs makes it difficult to dispense you a precise solution.
The fact that you can use the composite inputs to journal video confirms that the PC most likely have a capture card and conceivably a TV tuner inside. This narrows it down to roughly speaking 10 products that come preinstalled in a PC and integrate inputs on the overnight case. The card with the composite inputs should own an application to use this device.
If it is an ATI All In Wonder or similar then the fix is smooth. Start the application for the capture device afterwards make the output full peak. Do not hit the record function but revise the input selection to composite (I do this next to the ATI AIW), ans the screen will display doesn`t matter what compatible signal is on the composite RCA inputs.
The problem may change from no display to distorted display. This depends on the signal from the XBOX and the gamut of compatibility on the capture device.
If the composite inputs are somehow not compatible, or you do not hold the input switching application properly installed then consider a low prices solution that cuts the PC out of the signal loop.
I know you don't want to spend, but here is the type of item that will work if you metamorphosis your mind.
Straight to the monitor VGA box:
The XGA Box = GOOD Quality for standard CRT or LCD monitors, res up to 1024 x 768 - $60
http://www.estarland.com/product16952.ht...
Also, these work through the PC using USB 2:
http://www.amazon.com/gamebridge-avc-140...
GOOD LUCK!!
The answers post by the user, for information only, QAPOP.com does not guarantee the right.
More Questions and Answers ...
Related Questions: