1st monitor wont switch on very soon monitor wont switch on?
Answer:
Try the following steps and I gurantee you that the problem will be solved.
1) embark on you computers cabinet,
2) remove all the power cords from the devices it have been attached to, (i.e, concrete disk, cd\dvd drive , floppy drive etc)
3) remove the ram Module from its socket scarcely.
4) carefully blow of adjectives the dust from the motherboard using a bower or u can use you vaccum cleaner with blower on mode.
5) power on your system on matching state, and the switch it of again within 5 secounds
6) again re-insert the bump module in its slot.
7) power on your system again, this time you will know how to see the display on your computer, once you see the display switch off your computer again and plug contained by the power codes to all the devices from which you have unplugged.
you system will be ready o work again. if you fine any problem during the process you are free to bring in touch next to me on my email id : chetankaria@rediffmail.com
Your VGA card is tattered. That is the port where you plug contained by the cable from the monitor. Have that change and your problemis solved.
Sounds close to that someone has installed the supporter incorrectly hence no working monitor, a few wires put in the wrong place,
permit someone who knows what they are doing look at you computer, also you do know that you should turn on the monitor first next the computer. best of luck
Difficult to say.
It may be the video card.
does the computer nouns like it is booting up usually?
Do you have a video card next to a seperate fan on it?
have it stopped turning?
if you could get a sprite to swap video cards with you, merely for a trial, you could, at least, rule out that demanding bit of kit
the problem could be within the video card to which your monitor is attached.
i had a similar problem next to my computer and i found that the 15 pin connector of monitor had one of the pins broken. when i substituted a metal nozzle in place of the pin the monitor worked fine. but since you enjoy already swapped monitors and checked, the problem could be in the display card.
try swapping the display card.
do you hear any beep sounds when you start the computer?
there is also a remote arbitrariness that the ram is not fit properly.
The monitor or display of a computer is the primary user interface. Monitor problems are some of the most adjectives computer problems since the voltages inside a monitor can be as high as 10 KV. Many of the problems can be fixed yourself by simply shifting the settings. Detailed instructions available at http://fixit.in/monitor.html
Related Questions: