My monitor is getting switched rotten lately after it is switched on. What could be the problem?
Answer:
EHT is the "Extra High Tension transformer" in a monitor. This EHT also available within TVs.
This EHT switches on and off and its purpose is generate, most of the secondary voltages within the TV or monitor. Also the "High Tension" for the picture tube.
You can refer to more TV/monitors repair at this site. <http://www.overclockers.com.au/wiki/tv_/...
your video card is out or loose......or your drivers god deleted....the drivers for your monitor
Asked him what EHT is ??
A sickly monitor indicator light indicates no signal is getting to
the monitor from the video card. Could be the card is not sending a signal, or problem next to the cable or connectors. Card may not be seated properly.
Also dust collects inside computers, and can impose hardware damage. You should be verbs.
ignore what >> hopeless_rom...<<<said she is hopeless she dont know what she is chitchat about dont enjoy the brains
does your monitor go on stand by if so
right click the desktop click on properties
after click on the screensaver tab
then click on the power tab at the bottom
look contained by the box if it is set to turn off surrounded by 1min
if so set it to never
if the power goes sour on the monitor and you have to put it hindmost on then you may as very well go buy a unsullied one coz some you will be ripped off by some technician here fix it but they will fix it so the thing break's down again
This have nothing to do near drivers. This is a hardware failure. The EHT is a VERY powerful piece of equipment that WILL knock you across the room if you're not thorough.
Please. just replace the monitor.
a short
Related Questions: