Can i connect my laptop to my home pc's internet w/o using a router?
Answers:
That's what ethernet cables are for, mofo...
You can use the web port on your laptop and your desktop to network the 2. You might hold to buy a 10. network card for your computer if your motherboard lone supports one. Myself id basically buy the wireless router.
Yes, you use the Ethernet Cable RJ-45 to connect between your laptop and the other.
Good Luck,
PS: It requires a little set up to work!
You involve the router.
Reason - the cable company only provides you next to a single IP address. If you want to use more than one PC on that connection at one and the same time you need something that will provide grating address translation (i.e. NAT).
You can get a wireless router that also have a 4 port "wired" hub, your laptop uses the wireless, your desktop the wired. Both can be used at the same time.
use an ethernet cable
So you want both computers to be skilful of accessing the internet correct? If this is the suitcase, then the answer is unquestionably no. You will need to procure a wireless router (it also comes with several RJ-45 ports) so you can hook up your home PC as resourcefully as your laptop. Then both will have access to the internet. The cost is $50. You will also enjoy the benefit of using the router's hardware firewall to prevent people from hack into your computers.
I personally resembling the Linksys four port router. Very easy to configure and abundantly of features.
Good luck!
What are you trying to do? Do you want to set up a home network, or are you trying to connect both computers to the internet?
In the first covering, yes it is possible to do it without a router.
In the second shield... depends.
Let's examine first the second case.
If your ISP is assigning you lone one IP, then you can't connect both computers to the internet in need using a router. You *could* connect one at the time, but it involves manipulating MAC address and it still may not work.
If your ISP assigns you more than one IP, then you don't *need* a router. All you call for to know is the second IP address, which should be provided by your ISP.
But there's still the matter of *how* are you going to connect the second PC!
If your ISP have given you some type of wireless access point, then adjectives you need is the IP as above.
Otherwise, you still want something else to connect the PC to. A switch or hub would be the cheapest option (they can cost around $10). You plug the switch/hub to the cable modem, and both computers to the switch. You merely need to configure respectively IP then.
If adjectives you want is to have a small introduce yourself, a router is recommended; but if you don't want one, you can still do it.
Again, you can use a switch, the same setting described above.
But if you only want to connect the 2 computers to each other, you can use a *Crossover Cable*. You can purchase a arranged made crossover cable or make one if you're handy, and configure one IP to respectively PC. There's a description of how to do that in the source interconnect.
And those answers just clich¨¦ "use a network cable", they backfire to explain *where* to connect the cable! How useful is that?
You will stipulation a router to do that. A router usually has 5 different Ethernet ports within the back. One is for the major source of Internet, which comes from a modem or Ethernet wall jack. The other 4 ports are for other computers that you want to use for that source. It's just close to a phone line splitter, to connect more than one phone column to one jack.
More Questions and Answers ...
Related Questions: