MTLDR is missing?
Answer:
Don't you anticipate NTLDR?
That is your windows boot loader. If you made a rescue disk you can boot from that disk and later copy that file subsidise to the root of C:\
Here are instructions on how to make a boot loader disk.
http://support.microsoft.com/default.asp...
More than feasible since your NTLDR is corrupt you will have to enjoy to restore your system using the system restore disk.
Surely you mean NTDLR? Most of the time, this ability your OS is hosed. You're probably going to have to reformat and reinstall window.
Wow.. you got a tangible answer from me. Lucky.
Here is how to fix this problem below.
1. Boot to a command prompt by using a boot disk (if you have one. Otherwise you can create one from any Windows 95/98/ME PC.
2. At the command prompt, type fdisk, and then press enter.
3. Click set alive partition, choose the screen that you want to make helpful, and then hit enter.
4. Press Esc.
5. Remove the boot floppy disk, restart the computer.
Using the Recovery Console, copy the Ntldr database from the Windows XP CD-ROM to the root directory of the current active barrier. Follow these steps:
1. Start your computer by using the Windows XP Setup floppy disks or by using the Windows XP CD-ROM.
2. At the "Welcome to Setup" screen, press F10, or press R to repair.
3. Press C to start the Recovery Console.
4. Copy the Ntldr folder from the Windows XP CD-ROM to the root of your system partition by using the following nouns, pressing ENTER after each command:
1. Type cd .. to shift to the root of drive C. (Note the space)
2. Type the letter of the CD-ROM drive
3. Type cd i386 to modify into the right directory
4. Type Copy ntldr c:
5. Type Exit
If the partition be not formatted by using Windows, you might also need to run the Recovery Console fixboot command to spawn the active separator bootable.
After you can boot into Windows, it is recommended that you use the Windows Disk Management snap-in tool to reset the original system screen as the active dividing wall, and then restart the computer.
From Microsoft:
If the NTLDR is missing or diluted try the Recovery Console.
To start the computer and use the Recovery Console to replace the boot sector
"Insert the Windows XP Professional Setup CD-ROM into the CD-ROM drive.
Restart the computer. If prompted to press a key to start the computer from the CD-ROM, press the appropriate push button.
When the text-based part of Setup begin, follow the prompts. Press the R key to repair a Windows XP Professional installation.
If you are repairing a system that have more than one operating system installed, from the Recovery Console choose the Windows XP Professional installation that you need to repair.
Note
If you press ENTER short typing a number, the Recovery Console quits and restarts the computer.
The Recovery Console might also show valid installations of Windows NT 4.0. However, the results of attempting to access a Windows NT 4.0 installation can be unpredictable.
When prompted, type the Administrator password. If you do not have the correct password, or if the financial guarantee database for the installation of Windows XP Professional that you are attempting to access is corrupted, Recovery Console does not allow access to the local disks and you cannot replace the boot sector.
To replace the boot sector, at the Recovery Console command prompt, type: fixboot [drive:]
If you do not specify a drive letter, the Recovery Console replaces the boot sector of the system volume. If you have need of to replace the boot sector of a volume that is not the system volume, next you must specify the appropriate drive letter."
It's possible your computer's thorny disk drive may have a corrupt boot sector and/or master boot narrative.
Try to repair this using the Microsoft Windows Recovery console by running the fixboot and fixmbr commands.
Boot from the Windows 2000 disc, and run the above command (fixboot)
here's some link for you to read.
http://www.computerhope.com/issues/ch000...
http://www.computerhope.com/issues/ch000...
Your OS is undermined. If Win XP, try this repair procedure:
http://www.informationweek.com/shared/pr...
Worked great for me 3X in different PCs and one of our peers here.
Format is a ending resort and for the desperate only.
More Questions and Answers ...
Related Questions: