What's the best route to acquire background out of an ripened pentium 1 computer?
Answer:
1. Floppy ought to do it or a series of floppies if the files arent to big. If they are slightly bigger than the floppy you can carry a file splitter which will break the folder up into parts so you can use a floppy, then you recompile them within your other computer then verbs them into your external drive via usb.
2. Install a burner into the old electrical device and burn the fiels off afterwards put the burner back into your other tool.
3. Install a usb port with drivers and verbs the files using a memory stick
4. Take out the harddrive from your old electrical device and slave it onto your other computer. When you start your new computer click on "My Computer" and the elderly drive should be there as an extra drive (while its here right click it and format it after youve transfered the files).
5. Take the old mechanism to a PC shop and ask them to put the files onto a disc
Formatting: Yes use your recovery discs should be fitting because you'll actually be putting on a fresh installation of Windows for whoever you donate it to (give the salvage cd's with it because theyre specifically for that PC and no longer any use to you)
Remove the complex drive & temporarily hook it up to your newer PC to copy & paste the folders you want to hold on to.
Just reformat it.
regards,
Philip T
restart to a DOS prompt, and type "format C:"
Hope you get start up discs.. this is brute force deletion of everything..
Honestly, those old rock-hard drives were usually no bigger than 2-4 gigs. I would only email the files you want to your Yahoo account, which is give or take a few 2.5 gs.
Reformat it with the rescue disk, and include the disk with the computer when you distribute it away.
dont get pushy beside it. just be unadulterated nice and ask it to tell you everything it know.
You can add the concrete drive to your current system as a slave and drag whatever folders you want to maintain to your hard drive on your current workstation. If your computer does have a USB port you may be capable of use your external drive, good luck finding drivers : (
You can use the floppy drive, or a compact disc burner.
As far as cleaning the Hard Drive. Depends who you're donating too. Reformatting and using the recovery disk will be righteous enough for the adjectives user. But if it's someone who is tech savy and you don't want anyone to ever see any of your personal stuff use a software:
http://www.download.com/3120-20_4-0-1-0....
An 8 year old computer probably will not own a USB port, but IF it does, you're in luck! Just connect your external USB drive and drag & drop the folder you want into it.
If here is no USB port, then you may want to hook up the older machine to a router and verbs files through the LAN, make sure you hold the same workgroup nickname and sharing privileges for the disk to be accessed.
Finally, you could email the folders , as attachments, to yourself via gmail or other web-based email system.
With your system so feeble, it may be better to destroy the drive, and administer the computer to your local recycling center.
Just attain the old knotty drive from your Pentium 1 PC then plug it to your alien one. Make sure you get the pin setting correctly and BIOS.
You said I give attention to they didnt have USB's posterior then you never said you be sure if it had any check I presume it does have atleast 2x1.0 ports.
If you get that coputer 8 years ago it must have be used since 8 years ago Pentium 2's were dying out and Pentium 3's be taking its place Pentium 1's domminated 1996 and half of 1997 so your notebook must have be from 1996-June 1997 not 1999.
If IT DOES have USB's You Need to own Windows 98 to detect mass storage if you have that turn it on plug usb within IF its a pentium 1 the HDD is ro'und 1gb-8gb stock unless upgarded if its around 8gb with 1.0usb ports it will pinch a good 2 hours to verbs to the USB HDD.
TO reformat normally you stipulation a windows disc put it surrounded by makle the c boot the disc b4 it boots the OS this can be set via the Bios the OS disc starts then you run through the Blahbalh stuff then Format.your workstation will restart after a few hours and then if yuou want the OS pay for on put the disc in blahblah again after make a/or partion/s later install OS (Please do not use anything higher after 98 on a pentium 1 Xp will make it clutch 1 hour to start up!
The instilation takes a few hours and if you want to Brute format it eneter Command prompt mode (DOS mode) and type contained by the formating code whihc can be found on the net ive never done it I muse someoen posted it but I think it might be the memorandum of your drive Format C:\ or something.
Related Questions: