My system can not boot!?
Answer:
I agree with "vx7g3", check the simple one first. memory, afterwards battery, Also, video card can be a problem also. CPU seldom give you problems, even if it is OEM, unless you "burned" it out. Today's CPUs runs really hot and they want a lot of extra cooling. If you did not install the proper cooling gears contained by the first place, you're out of luck no one "fixes" dilapidated CPUs.
Sometimes video cards can be the problem. I once installed 8x AGP card on 4x compatible motherboard. the video card was compatible next to 4x mobo according to the manufacturer but it worked for a while next it quit on me. Once I put in my outmoded 2x agp card it worked fine...that was few years ago.
There are some cheap diagnostic cards that you could purchase (10~$30) from geeks.com or tigerdirect.com that might know how to pinpoint what the problem is exactly. But if you assembled the computer yourself, go put money on and re-do the whole entry, making sure all the connections seated correctly and not loosened up.
Most vendor won't give you settlement for CPUs even if they are defective, only exchanges.
Good Luck.
Check the RAM ..verbs it out of the motherboard and reinstall it again ...try interchanging the slots. Also check the CMOS battery. Might enjoy gone "kaput" ..however highly unlikely.
Or even worse ..your monitor have gone bust! I surely hope not!
clear the CMOS on the motherboard. your motherboard is not posting anymore, sometime due to a change surrounded by the bios that it doesn't like, or a hardware issue. most motherboards enjoy a jumper which you own to move from pins 1 and 2 to pins 2 and 3 (or vice versa) to clear the CMOS. refer to your motherboard user manual for details. this should clear adjectives of the settings back to factory defaulting. also, I would recommend updating the bios from the manufacturer if one is available from the manufacturer's website. you can download the flash program and bios update onto a floppy and use a bootable floppy to achieve into a dos command prompt once your system posts again. many times bios updates resolve issues near ram compatibilities and boot issues.
If the easier said than done drive is bad it won't boot up but you will see some set book on the monitor but if you see black monitor it is even ram is not seated apt or video card is going bad.
Well unanimously the computer's beep is an indication that it is any working or not working. Problems dealing beside the processor, RAM, or video card will cause the hoot to change. Warning you that something is wrong. So, if in that is no beep i expect it would be safe to voice that the component that does the beeping, the motherboard, is the problem.
More Questions and Answers ...
Related Questions: