Does anyone enjoy an internet webcam that will work near a Mac airport router?
Answer:
How do I use EvoCam's built-in web server when connected to the Internet via a router or AirPort foundation station?
If you are using EvoCam's built-in web server from down a router or AirPort base station, you will involve to configure your router or base station to forward requests on port 8080 through to the computer running EvoCam. Once you've done this, you'll know how to connect to your router or base station's public IP address, fairly than the one displayed in the Server tab (which is valid lone on your local network).
For AirPort, you will need to use the AirPort Admin Utility to affix a 'Port Mapping' entry. Here's how:
Open the AirPort Admin Utility (located in Applications > Utilities).
Select your foot station and click Configure.
Click the Port Mapping tab.
Click Add.
In the Public Port field type contained by: 8080
In the Private Address field type surrounded by: 10.0.1.201
In the Private Port field type surrounded by: 8080
Click OK.
Click the Internet tab and make a minute of your DNS Server addresses.
Click Update.
Next, configure the computer running EvoCam to hold IP address 10.0.1.201 (this address is outside the range of address as a rule distributed by the AirPort base station's DHCP server). Here's how:
Choose Apple menu > System Preferences.
Choose View > Network, or click the Network deity.
Choose AirPort from the Show pop-up menu.
Click the TCP/IP tab.
Choose Manually from the Configure IPv4 pop-up menu.
In the IP Address field type contained by: 10.0.1.201
In the Subnet Mask field type surrounded by: 255.255.255.0
In the Router field type within: 10.0.1.1
In the DNS Servers field type within your DNS Server addresses from previously.
Click Apply Now.
For routers, the configuration process is usually very similar, but it can alter depending on the model of router, so please refer to your router's documentation for more information.
Now that you've configured your router or base station to forward requests through to EvoCam, you will know how to connect to your router or base station's public IP address to scene your webcam. For example, if your public IP address is 1.2.3.4, you would use:
http://1.2.3.4:8080/webcam.html...
If you don't know your public IP address, visit our IP Address page to find out. If your IP address is dynamically assigned by your ISP and change periodically, see "How can I access EvoCam's built-in web server if my Internet nouns uses a dynamic IP address?" below.
good luck
:>
Related Questions: