Can I use 2 different DDR Ram surrounded by 1 mainboard?
Answer:
Let me face your question
There are different RAM brands available surrounded by the market which comes contained by different frequencies. Even if you plug two different RAM's with different frequencies your system wont throw any error, But will trip up shortage of performance drastically. Since adjectives the files during system execution occupies your push memory there should be synchronised speed between your hardware [RAM] if they are not within the same speed after your system will compromise with the lower frequency even if you own a high frequency strike. My recommendation would be better move about for a single stick of RAM so that you can avoid the frequency mismatch which will boost your system performance heavily...
as a standard rule the ram sticks have need of to match ...but check surrounded by the mother board hand book ...sometimes you can seize away with it ....
2 diff DDR,diff surrounded by speed - NO
2 diff DDR same brand same speed - Yes
Depends on your motherboard. Turn your comp off and undo it up and look at the motherboard. The RAM sticks go within long thin slots (I am assuming you know what they look like), if you hold multiple RAM ports then you SHOULD know how to use multiple RAM sticks. If you have any of the innovative documentation on your motherboard, it will tell you how much RAM it can use, etc. A standard rule of thumb for multiple RAM sticks tho is that it helps if the 2 RAM sticks are alike type or size, if not the larger stick desires to go within the first or main slot.
as long as the motherboard is competent to do the type of ram you are using it should work, however it is best to stick to indistinguishable type of sticks for ram, lately for ease and it allows for the motherboard to use knock against of the same speed so one stick isnt slower than the other. Read your motherboard booklet to see if it is capable of using the bump you want to use, and if you have doubts ask a computer store close to your house.
two different rams next to same make you can use even
push capacity differs,
you re cross-examine is quite 'questionable'. but, anyway; you can use two different DDR bump, possible with 2 differences frequency (e.g: DDR400 and DDR333 and system runs on 333Mhz)
..................
Yup! but it depend on what type of hit do you have, usually Kingston doesnt endow with any prob>
.................
Recommendation= both must be same pair
Depend on Your Maiboard
If the mainboard supported its OK
so Far Mainboard solitary support same type DDR
no you can't id yoou ddo so you'll dmage your computer you should use indistinguishable DDR, for example you have DDR II 1 see /533 then subsequent time you are going to add buy like peas in a pod one.
Related Questions: