Replacing a video card?
Answer:
Its easy to Install a video card! Since explaining will be confused here is the Video shows how to Install a Video card. You cant disable a aged video card. You simply turn off your laptop and take out the feeble Video card, and turn it back on when you finish install!
http://www.youtube.com/watch?v=bopjxneo8...
I hope this will abet you! Good Luck!
If you mean your video card is integrated into the motherboard, consequently all you enjoy to do is install the new one and it will appropriate over for the old one. You will find the stipulation to install the drivers, but your computer will still function while you do it.
you should still have a video agp card slot or a pci slot on your mother board. if you dont own one then you cant install it.. if yes later just insert it into the slot and start the computer... you dont involve any hardcore tutorials for this... just plug and play. insert the slot, start your computer.. if everything go well you can own dual monitors. :)
all the best.
previously buying a addon card. look at your mother board. and see if theres a AGP or PCI slot. the agp is further away from the back of the defence, and usually a brownish colors itll always be at the upper/ middle nouns of the computer. pci is a white/creamish colored slot, match this three lettered acronym next to the add on cards' box. also read your mother boards brochure for possible diagrams of your motherboards capabilies.
You'll first need to disable the onboard video contained by the system BIOS . This is done when the computer first boots and you get the picking to enter 'setup' usually by pressing the delete or F12 key (watch the peak at boot up). Then find the correct area contained by the BIOS settings that has the onboard video and select to disable it. Save settings, shut computer sour, install new video card, connect video cable from aged location on motherboard to back of video card, start computer and agree to Windows start up - it will tell you modern hardware found - when window comes up asking to install unmarked hardware just hit annul, let Windows finishing its start up, put CDROM within drive that came near video card, and follow the setup routine. Piece of cake.
Disable the onboard sound within the BIOS, if you don't have BIOS setting for that, next disable it in "Device Manager".
UPDATED RESPONSE:
Why are twelve year infirm morons thumbs downing things that they have certainly no understanding of? Go away!
Well near are two ways you can do this in Windows or contained by your bios.
The easiest way is lately to do it in window. Go into my computer -> control panel-> system ->click on hardware tab-> right click the adapter you want to disable right click then hit disable.
Or you can disable it contained by your BIOS. Do this 1) restart your computer. 2) press Delete, F1 , F2, Shift + F2, or what button(s) it tells you to press after 1st blare. It will say when you restart press 'blah blah blah key(s)" to enter setup. 3) you will enter bios setup. 4) It should be below 'Onboard Configuration blah blah' or 'intergrated PCI blah blah'. 5) just look for onboard video card and money it to disable.
these website explains it
http://www.wikihow.com/disable-onboard/i...
http://forums.techguy.org/hardware/31232...
Related Questions: