CMOS Won't Recognize DVD drive?
I verified that the NEC DVD drive that is plugged into the top portion of the IDE cable have its jumper set as master. I next verified that the Lite-On DVD drive that is plugged into the middle portion of the IDE cable have its jumper set as slave.
That didn't work, solely the master NEC drive was notorious in CMOS. So I switched the drives, so that the slave become the master (changed the jumpers as well). Once again the master be the only one accredited, but the master at this point was the Lite-On drive. So that rules out a not working drive since both drives have be recognized by the CMOS when they be the master.
So I figured the problem be the cable. I tried two more cables and still the solely drive that the CMOS recognizes is the master.
I downloaded and flashed the most recent BIOS version for my motherboard to see if that be the problem, but that still didn't fix it.
Please advise.
Answer:
You enjoy already checked to see that both of the drives DO work. So there is a problem next to some part of your computer. As you said, the CMOS must be capable of recognize it so if it doesn't (given that you know what settings you own to change both surrounded by jumpers and contained by the setup of your main board), afterwards you are going to have to update your CMOS. By updating I don't be set to buying a new computer!
When you bought your computer, you should enjoy had be given a CD for your motherboard utilities. Insert that disc into your CD rom contained by the Windows OS (preferrably) and then try to find a software within it called BIOS FLASH or FLASH. After have found it, execute it and let it connected to the Internet and download the most up-to-date BIOS IMAGE for your CMOS. After it is done, restart your computer and you will be good to dance.
In case you couldn't find your motherboard compact disc, try to search for %X BIOS FLASH contained by Google where %X is the brand of your mother board.
If you still find yourself confused and you focus you can't do these, contact the vendor you bought your computer from and they will ruin you a copy of your BIOS FLASH utility.
Good luck.
Have you tried setting your jumpers on cs?
try swapping the cable between your primary and lesser IDE channels, possibly you have a bleak IDE controller or one of the pins is tarnished. You can get USB 2.0 to IDE adapters that work terribly well.
http://www.newegg.com/product/product.as...
full document:
Related Questions: